Grill AssemblyBuilt-In Instructions5-1213-1521-2216-19172023
1. Attach the Side Burner to the grill by inserting the shelf hooks into the slots on the side of the grill and pushing down on the shelf assembly un
SIDE BURNER PARTS ASSEMBLYInstall grate over burner (See Fig. 23)LEAK TESTINGMake sure all burners are turned to “OFF”.Turn on the gas at the cylinder
11Built-In InstructionsPlanning and DesignStart by identifying the number and size of components you want to include: Grill, side burner, access doors
Built-In Instructions1235 1/2” Max.27 1/2” Min.BDEC*GasCutout2”Opening foraccess door(s)ABCDEABCDE30”Grill30 1/8”21 1/8”10 15/16”N/AN/A30”Grill30 1/2”
13General InformationVerify the type of gas supply to be used, either Natural Gas (NG) or Liquid Propane (L.P)., and make sure themarking plate (locat
L.P. Gas InstallationFrigidaire Gas Grills that are set to operate with L.P. gas come with a high capacity hose and regulator assembly. (Note: Only u
General InformationAlthough all gas connections on the grill are leaked tested at the factory prior to shipment, a complete gastightness check must be
Grill LocationDo not use the grill in garages, breezeway, sheds or any enclosed area. Never operate the grill in enclosedareas as this could lead to
Before LightingWarning: Important! Before Lighting...Check the gas supply line for cuts, wear or abrasion.Always keep your face and body as far away
The grill rotisserie system is designed to cook items from the back using infrared heat. The rotisserie burneris an infrared type which provides inte
Welcome & CongratulationsPlease record Grill information for future reference and service work: Model #:Serial #:Date of Purchase: Gas Type: Pleas
Rotisserie LightingOpen the lid. Push and turn the control knob counterclockwise to the “HIGH” position. Wait 5 seconds.Then press and hold the ele
Drip TrayThe drip tray located below the grill, inside the cart, should be cleaned periodically to prevent heavy buildupof debris. Note: Allow the dr
General Trouble ShootingYou should inspect the burners at least once a year or immediately if any of the following conditions occur:The smell of gas i
22ProblemFlame is erratic Flare-UpsBurner flame is yellow or orange, in conjunction with theodor of gas.Cart door does not align properly with cartSol
LIMITED LIFETIME WARRANTYIf you have other questions, please contact Customer Service Hotline(800) 320-0859Because of continuing product improvement t
TESTED IN ACCORDANCE WITH ANSIZ21.58b-2002/CGA 1.6b-M02 STANDARD FOROUTDOOR COOKING GAS APPLIANCES.THIS GRILL IS FOR OUTDOOR USE ONLY.Check your local
3Grill Features: FD301. Roll top grill hood 8. Warming shelf2. Grilling/Cooking surface 9. Infrared back burner3. Side Shelf 10. Electronic ignitor: m
Cart Parts2 L-shaped side pieces 1 U-shaped back side piece 1 Base2 Wheel channelsCart Door Parts 1 Door handle kit 1 Nylon bushing 1 Door pivot screw
5Cart Assembly, Door Stops & Door Pivot Bolts1. Attach the two L-shaped sides to the back portion of the cart, making sure the two holes face up &
Attaching Grill Head to Cart1. While keeping the Grill on the foam base lean it onto its back. (be sure to hold the hood shut when doing this.) With
Installing the Cart Door Handles1. Using a 5/32” allen wrench insert 1 screw through the inside of the door front into a bar handle end and tighten se
Side Shelf Attachment1. Attach the shelf to the left side of grill by inserting the shelf hooks into the slots on the side of the grill and pushing d
Comments to this Manuals