Frigidaire Side Burner FOR OUTDOOR USE User Manual download pdf (Page 8)

IMPORTANT: Make sure you have converted

the side burner to Liquid Propane prior to

completing the following steps.

1. Remove the LP gas hose assembly from the

flare fitting. (this has the regulator attached to

it.) (See Fig. 12)

2. Using an adjustable wrench remove the

flare fitting coming out of the bottom of the

grill.Once the flare fitting is removed the main

gas pipe will be showing under grill. (See Fig. 13)

4. Using pipe sealant, attach the “T” Fitting to the

main gas pipe coming out of the bottom of the

grill and tighten with a wrench. (See Fig. 14)

5. Using pipe sealant, attach a 3/8” flared fitting to

the side and bottom of the “T” fitting. (See Fig.

15)

6. Attach the Flex Line to the fitting on the side of

the “T” fitting. Connect the other end of the flex

line to the side burner valve. (See Fig. 16)

Note: This line can be extended using a 3/8”

flared coupling and an additional flex line if

necessary.

7. Attach the LP gas hose assembly to the

bottom flared fitting. (See Fig. 17)

Fig. 12

Fig. 13

Fig. 14

Fig. 15

Fig. 16

Fig.17

Be sure your L.P. cylinder has an overfill

protection device on it. Max inlet pressure

cannot exceed 10”-11” water column.

Flex Line

Gas Hose

Main Gas Pipe

Attach to fitting

“T” fitting

P hose/

regulator

upplied

with grill.

LP Grill Conversion

1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments

Frigidaire Side Burner FOR OUTDOOR USE User Manual Page 8

Comments to this Manuals

Related products and manuals for Barbecues & grills Frigidaire Side Burner FOR OUTDOOR USE