Frigidaire FFES3027LS User Manual download pdf (Page 7)

NOTE

Radiant elements have a limiter that allows the element

to cycle ON and OFF, even at the HI setting. This

helps to prevent damage to the ceramic smooth top.

Cycling at the HI setting is normal and can occur if the

cookware is too small for the radiant element or if the

cookware bottom is not ﬂ at.

Be sure to read detailed instructions for ceramic glass

cooktop cleaning in the General Care & Cleaning

section and Before You Call checklist section of this

Use and Care Guide.

BEFORE SETTING SURFACE CONTROLS

About the ceramic glass cooktop

The ceramic cooktop has radiant surface elements

located below the surface of the glass. The design of the

ceramic cooktop outlines the area of the surface element

underneath. Be sure to match the pan size with the

diameter of the element outline on the cooktop and only

ﬂ at-bottom cookware should be used.

The type and size of cookware, the number of surface

elements in use and their settings, are all factors that

will affect the amount of heat that will spread to areas

beyond the surface elements. The areas surrounding the

elements may become hot enough to cause burns.

About the radiant surface elements

The element temperature rises gradually and evenly.

As the temperature rises, the element will glow red. To

maintain the selected setting the element will cycle on and

off. The heating element retains enough heat to provide a

uniform and consistent heat during the off cycle.

For efﬁ cient cooking, turn off the element several minutes

before cooking is complete. This will allow residual heat

to complete the cooking process.

Element ON & hot surface indicator lights

Your appliance is equipped with two different types of

radiant surface control indicator lights that will glow on

the backguard- the Element On indicator light and the

hot surface indicator lights.

The element ON indicator lights are located on the

control panel (Figure 1) between the two radiant element

control knob and will glow when a surface element is

turned ON.

Hot surface indicator light location

Figure 2

Element ON indicator light location

Figure 1

The hot surface indicator light located on the cooktop

(Figure 2) will glow when any surface cooking area heats

up and will remain on until the glass cooktop has cooled

to a MODERATE level.

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Comments to this Manuals

No comments

Frigidaire FFES3027LS User Manual Page 7

Comments to this Manuals

Related products and manuals for Cookers Frigidaire FFES3027LS