Frigidaire PL36WC41EC User Manual download pdf (Page 2)

Accessories information available

on the web at frigidaire.com

Under-Cabinet Hood

PL36WC41E C 36" Wall Mount

USA

•

10200 David Taylor Drive

•

Charlotte, NC 28262

•

1-800-FRIGIDAIRE

•

frigidaire.com

CANADA

•

5855 Terry Fox Way

•

Mississauga, ON L5V 3E4

•

1-800-265-8352

•

frigidaire.ca

Specifications

subject to change.

Under-Cabinet Hood Specifications

•

Product Shipping Weight (Approx.) – 32 Lbs.

•

Wall-Mount Installation – can be ducted vertically or horizontally.

•

Ventilation system is preset to recirculate air inside with no ducting

system required. Exhausting air outside is optional, using either

vertical or horizontal ducting system. (Refer to Ducted Option

Specifications for outside ventilation.)

•

Sones Rating – 4.5

•

Voltage Rating – 120V / 60 Hz / 15 Amps

•

Connected Load (kW Rating) @ 120 Volts = TBD

(For use on adequately wired 120V, dedicated circuit having 2-wire

service with a separate ground wire. Appliance must be grounded

for safe operation.)

•

Amps @ 120 Volts = 3.0 Amps

•

Always consult local and national electric codes. Check local building

codes for installation requirements, as they may vary per locale.

•

Connect vent hood with copper wire only.

•

Minimum installation height allowed from top of hood to cooking

surface is 24" - 30".

•

To improve performance, optional Duct-Free Kit recommended for

use with recirculating system.

•

Installation on recessed-bottom cabinets requires attachment of two

wood filler strips at each side of recessed area under cabinet.

Ducted Option Specifications

•

For outside ventilation.

•

Exhaust Duct Required – 3-1/4" x 10" (3-1/4" x 10" to 6"-round transition

duct can be used if needed)

•

For most efficient airflow exhaust, use a straight run or as few elbows

as possible.

•

Use metallic flex ducting only to connect rigid duct directly to

transitions (if allowed by code).

•

Thermal breaks such as short section of nonmetallic duct, should be

used in areas of extreme cold.

•

Cold weather installations should have additional backdraft damper

installed.

•

Refer to installation instructions on web for detailed duct preparation and

converting exhaust vent blower system for exterior exhaust ventilation.

Note: For planning purposes only. Refer to Product Installation Guide

on the web at frigidaire.com for detailed instructions.

Optional Accessories

•

Duct-Free Kit (Single-Pack) – (PN # 5304455850).

•

Duct-Free Kit (8-Pack) – (PN # DFKIT368PK).

•

Damper Kit (6-Pack) – (PN # DAMPKIT6PK).

•

7"- Round Damper Kit (Single-Pack) – (PN # 5304455851).

Under-Cabinet Vent Hood

PL36WC41EC

Frigidaire Baseline

20"

/4"

Top or rear power

supply locations

7" Round or

/4" x 10" rectangular

duct location (top)

/4" x 10" Rectangular

duct location (rear)

36"

13"

max.

cabinet

depth

Exhaust Options

Vent hood can be vertically or horizontally

ducted outside using round or rectangular duct; or

recirculated inside with no ducting required.

For detailed duct preparation and installation

specifications, refer to installation

instructions on web.

Outside Horizontal – 3

/4" x 10"Rectangular Duct

/4"5

/4"

Cabinet Front

/8"

/2"

Electrical

access hole

(in wall)

/4"

Horizontal

duct cutout (in wall)

/8"

Wood filler strips

Minimum 24"-30"

allowed from cooking surface

to top of hood

/4"

Outside Vertical – 3

/4" x 10"Rectangular Duct

Cabinet Bottom

/4"5

/4"

/2"

Vertical

duct

cutout

Electrical access hole (in cabinet bottom)

/2"

/16"16

/16"

Wood filler strips (recessed cabinet bottoms only)

/2"

Outside Vertical – 7"Round Duct

Cabinet Bottom

8"dia.cutout

for 7" round

duct

Electrical access hole (in cabinet bottom)

/2"

/16"16

/16"

Wood filler strips (recessed cabinet bottoms only)

/2"

1 2 3 4

Comments to this Manuals

No comments

Frigidaire PL36WC41EC User Manual Page 2

Comments to this Manuals

Related products and manuals for Fans Frigidaire PL36WC41EC