Frigidaire PL36WC51EC User Manual download pdf (Page 7)

- 7 -

PREPARE THE HOOD

(NON - DUCTED HOODS ONLY)

Note: The following materials must be purchased separately for non-ducted recirculation installations.

• Non - Ducted Recirculation Kit, Model DFKTWC51EC.

• 5” diameter metal duct.

1. Discard discharge collar and damper supplied with the hood. Install the 5” to 6” adapter supplied with the Non-Ducted

Recirculation Kit. Fig. 10.

2. Secure the plenum to the flue mounting bracket with (2) 3.9x6mm flat head screws (the screws are supplied with the

Non-Ducted Recirculation Kit “DFKTWC51EC”). Fig. 11.

INSTALL THE HOOD

(DUCTED AND NON-DUCTED HOODS)

Note: at least two people will be required to mount the hood.

1. Raise the hood into its mounting position.

2. Align the rectangular opening on the back of the hood with the wall-mounting bracket. Gently lower the hood until it

securely engages the bracket. Fig. 12.

3. Level the hood with 2 mounting screws (3.9x9.5mm) and secure with (4) mounting screws. Use drywall anchors provided

if wall studs or framing are not available. Fig. 12.

4. On ducted hoods, attach 6” round metal duct between the hood’s blower collar and duct that leads to the outside location.

5. On non-ducted hoods, attach 5” round metal expandable duct between the 5”-6” adapter on the hood and the connector

on the plenum.

6. Tape all duct joints to make them secure and air tight.

7. Plug the power cord into the electric wall receptacle. Tuck excess cord behind the flue.

FIG.12

MOUNTING SCREWS

(4.8x38mm)

RECTANGULAR

CUTOUT

WALL FRAMING

MOUNTING

BRACKET

MOUNTING SCREWS

(4.8x38mm)

MOUNTING SCREWS

(3.9x9.5mm)

FIG.10

FIG.11

5”-6”

ADAPTER

3.9x6mm

FLAT HEAD

SCREWS

PLENUM

FLUE MOUNTING

BRACKET

1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments

Frigidaire PL36WC51EC User Manual Page 7

Comments to this Manuals

Related products and manuals for Fans Frigidaire PL36WC51EC