Frigidaire FCGM181RQB Owner's Manual download pdf (Page 6)

6

Casters

The appliance comes with 4 casters; 2 with locks

for the front of the unit and 2 without locks for

the back of the unit. The casters allow you to

move the unit to it’s nal destination with ease.

The casters can then be locked into place.

Refer to the First Steps section for caster

installation instructions.

Features

Adjustable Temperature Control

The adjustable cold control is located on the top

left side of the evaporator housing inside the

unit. “5” is the medium (recommended) setting

and “9” is the coldest setting.

Appliance Start-up

Once the appliance has been located in its

permanent location and the proper power and

grounding has been provided, the following

items must be checked or completed:

Cool Down Period

For safe food storage, allow 24 hours for the

appliance to cool down completely before loading

with food. The appliance will run continuously

for the rst several hours. Do not place any food

in the appliance until after the rst 24 hours of

operation.

Thermostat Setting

Figure 6

• Heavy-duty epoxy powder-coated

adjustable shelves

• NSF-certied top-mounted evaporator

• 2-½” urethane foam cabinet insulation

• Torsion-spring door closer

• Heavy-duty xed and swivel casters

• 17-watt uorescent lamp

• Stainless steel evaporator housing

• Removable stainless steel drain cover

• Adjustable temperature control

• NSF-certied interior

• Heavy-duty front grill

• Heavy-duty commercially rated electrical

harness

• Heavy-duty removable stainless steel shelf

support

Regular

Shelves

Shallow

Shelf

Bottom

Shelf

This appliance is provided with 4 shelves. One

goes on the oor of the cabinet and the other 3

are placed in the metal side supports wherever

they are needed. The shallow shelf goes in the

upper position.

The appliance is shipped from the factory with

the thermostat set at about the mid-point of the

operating range. Adjustments colder or warmer

can be made after the appliance has been running

for at least 8 hours. Allow at least 8 hours for

temperature stabilization before re-adjusting the

thermostat.

Defrost Setting

The appliance is designed to defrost

automatically every 12 hours. To set the time of

defrost, wait until the desired time to defrost.

With the notch on the timer knob aligned with

the line on the bracket (Figure 6), turn the

defrost timer knob clockwise slowly. The timer

will click several times, then once loudly, at

which point the defrost cycle begins. The timer

knob will advance through the defrost cycle, then

click loudly at the end of the cycle. The appliance

will defrost automatically every 12 hours after

the rst defrost cycle.

For example, to set the appliance to defrost

at 10:00 AM, turn the timer knob clockwise

at 10:00 AM until the timer clicks loudly. The

appliance will defrost daily at 10:00 AM and

again 12 hours later at 10:00 PM. NOTE: The

appliance interior temperature will rise slightly

during the rst defrost cycle.

1 2 3 4 5 6 7 8 9 10 11 ... 35 36

Comments to this Manuals

No comments