Frigidaire FGPC1044U1 Use and Care Guide download pdf (Page 7)

Installation Instructions

.devreser sthgir llA.cnI ,stcudorP emoH xulortcelE 9002

Installation Instructions

EXHAUSTING HOT AIR

1. Extend either side of the hose (Fig. 3).

2. Slide the adaptor A into the excharge hole of the unit as shown on Fig. 4.

3. Install the window kit on the window and slide the adaptor B into the

window slider kit and seal. (Fig. 5 & 6)

In the COOLING Mode the appliance must be placed close to a window or

opening so that the warm exhaust air can be ducted outside.

First position unit on a flat floor and make sure there’s a minimum of 12"

clearance around the unit, and is within the vicinity of a single circuit outlet

power source. It is recomended to have a 50” clearance in the back of the

unit.

Fig. 3

Extend the side of hose

Adapter B Adapter A

NOTE: Refer to page 8 about how to install the window kit.

The hose can be extended from its original length of 15

" up to 59", but it is the best to keep the length to minimum required.

Also make sure that the hose does not have any sharp bends or sags. (Fig. 7)

Fig. 5

Window Slider Kit

Minimum:22.1"(560mm)

Maxmum:44.1"(1120mm)

Vertical

window

Fig. 7

Fig. 6

Window Slider Kit

Horizontal

window

Fig. 4

Minimum:22.1"(560mm)

Maxmum:44.1"(1120mm)

1 2 3 4 5 6 7 8 9 10 11 12 13 14

No comments

Frigidaire FGPC1044U1 Use and Care Guide Page 7