Frigidaire D25D User Manual download pdf (Page 9)

920-198-10

Drain Hose Routings

When using the function of continuous drainage, the drain hose must be

placed horizontally below the drainage hole (See Figure 23).

You must avoid uneven ground and folding the hose (See Figure 23).

FRD026

Continuous Draining using the Pump

(D50D/D70D models only)

STEP 1. Connect the attached continuous drainage adaptor (1) to the

drain hole on the rear panel (2).

STEP 2. Connect the supplied water hose to the plug that ts into the

drain hole.

STEP 3. Lead the other end to a suitable location for drainage, like a

drain or sink and insert the plug into the water drain.

The maximum distance and the rise may be 15 ft from the unit. Exceeding

this distance may damage the unit or cause leaks. When the unit’s drain

bucket capacity reaches a certain water level, it will drain automatically

(See Figure 24).

FRD027

SUPPLIED

WATER

HOSE

PLUG

NOTICE

In the automatic mode, the condensed moisture

is always removed through the air exhaust hose.

Removing the rubber plug from the water drain

will allow the water to drain out at this point. The

water drain can not be used.

Installation:

Dismantle:

Press the drain hole (3) on the unit rear panel. The automatic drainage

adaptor will pull out (See Figure 24).

Figure 23

Figure 24

www.sylvane.com 1-800-934-9194

1 2 3 4 5 6 7 8 9 10 11 12 13

No comments

Frigidaire D25D User Manual Page 9