Frigidaire MWTK(P)30K User Manual download pdf (Page 3)

Installation Instructions

Illustration 2

ELECTRICAL OUTLET LOCATION

Outlet should NOT be in the shaded area as indicated

on Illustration 2

NOTE 1:

If the Depth (C) dimension is greater than 21” (53.3 cm),

the outlet location may be in any area on the rear wall.

NOTE 2:

The floor of the opening should be constructed of

plywood strong enough to support the weight of the

oven and floor load (approximately 100 pounds). The

floor should be level for proper operation of the oven. Be

sure to check the local building code as it may require

that the opening be enclosed with side, ceiling and rear

partition. The proper functioning of the oven does not

require the enclosure.

Illustration 3

EXHAUST DUCT ASSEMBLY

1. Place the Exhaust Duct in the opening. When

the Exhaust Duct Assembly is in the opening

correctly, the flanges will be tightly against the

lower edge of the opening. See Illustration 3.

2. Secure the Exhaust Duct Assembly with the

two screws A.

IMPORTANT: Secure screws in outer hole.

Screw A

Exhaust Dust

Assembly

Flanges

1 2 3 4

No comments

Frigidaire MWTK(P)30K User Manual Page 3