Frigidaire 137102600 User Manual download pdf (Page 2)

137102600 (0806)

Towels Normal Perm Press Delicate Quick Bulky Timed Dry

Estimated

drying time ***

60 minutes 50 minutes 40 minutes 20 minutes 30 minutes 45 minutes

15 to 90

minutes

Temperatures

High



   

Medium-High 

* 

 

* 

Medium 



Low 



 

No Heat

** ** ** **

 

Dryness Level

More Dry 

Normal Dry

*  *  * 



Less Dry 



Damp Dry 

Options

Shrink Guard 

* 



Press Saver 



 

Cycle Signal



* Factory Available ** Not

*** Estimated cycle duration is based on normal

dryness level and factory settings.

setting settings recommended

DRYER SETTINGS CHART

AVAILABLE CYCLE SETTINGS - These temperatures, dryness levels and options are available with the following cycles:

Cycle Selection (Con’t)

Drying Temperature

For best results, follow the fabric care label instructions on items

to be dried. To change the drying temperature, press TEMP to

scroll to the desired heat. To protect your wardrobe, not all

temperatures are available with every cycle.

High heat is recommended for sturdy fabrics.

Medium High heat is recommended for most cotton fabrics.

Medium heat is recommended for wrinkle free, permanent press

and lightweight fabrics.

Low heat is recommended for delicate fabrics.

No Heat should only be used with a Timed Dry setting to dry

items containing feathers, down, foam rubber, plastics or rub-

ber-like materials; to freshen clothing, pillows or blankets; or to

dust draperies.

Note: Using No Heat in any Auto Dry cycle will result in

long drying times and /or wet loads at the end of the cycle.

Cycle Settings

Appropriate drying temperature, dryness level and options will

automatically be indicated for each cycle. The TEMP, DRYNESS

and OPTIONS settings can be changed before the cycle is

started. Those adjustments will automatically be remembered

each time that cycle is selected. If a temperature, dryness level

or option is not recommended for a cycle, the indicator will not

light.

If changes are attempted after the cycle starts, the status lights

will blink, the signal will beep and “Err” will be displayed. To

change a setting after the cycle starts, press Pause/Cancel once,

adjust the setting and press START to resume the cycle. See

the “Dryer Settings Chart” for more details.

Dryness Level

To change the dryness level, press DRYNESS until the desired

selection is made. Select Normal for most loads.

Occasionally a load may seem too damp or over-dried at the end

of the cycle.

To increase drying time for similar loads in the future, select

More Dry. For loads requiring less drying time, select Less Dry.

Select Damp Dry for items you wish to partially dry before hang-

ing or ironing.

Note: To prevent over-drying, not every dryness level is

available with every cycle.

Options

To select an option, press OPTIONS until the indicator for the

desired option flashes, then press Select. If an option is not

available for a cycle, the indicator will not light. Follow the same

steps to delete an option.

The Cycle Signal will sound at the end of the cycle and periodi-

cally during Press Saver.

Select Shrink Guard to lower the initial drying temperature to

protect fabrics from overdrying.

Select Press Saver if the dried load might not be removed

promptly at the end of the cycle. The dry load will continue to

tumbling without heat for 30 minutes to help reduce wrinkling.

When the Cycle Signal is selected, a beep will be heard

periodically. The load may be removed any time during Press

Saver.

Dryer Features

(Control Lock)

To avoid having someone accidentally start or stop the washer,

press OPTIONS and Select at the same time and hold for about

10 seconds until the (Control Lock) lights up. “LOC” will be

displayed alternately with the estimated cycle time. Turning

the Cycle Selector knob or pressing any button will produce

flashing indicator lights and/or beeping. To unlock the controls,

press and hold OPTIONS and Select for about 10 seconds.

Status Lights

The following indicators may be lighted during the cycle:

• Drying

• Cool Down

• Press Saver

• Clean Lint Filter

• (Control Lock)

* Factory setting

Available

settings

** Timed Dry

Cycle Only

*** Estimated

cycle duration is

based on normal

dryness level and

factory settings.

These temperatures, dryness levels and options are available with the following cycles:

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Frigidaire 137102600 User Manual Page 2

Comments to this Manuals

Related products and manuals for Smoke machines Frigidaire 137102600