Frigidaire FWF81260W User Manual

Safety information...2Safety instructions... 4Product description...

The data in this table are approximate. Different variables can affect the data: thequantity and type of laundry, the water and ambient temperature.

temperature With this option you can change the defaulttemperature.Indicator = cold water.The indicator of the set temperature comeson.spin With thi

permanent extra rinse With this option you can permanently havean extra rinse when you set a newprogramme.• To activate/deactivate this option touchth

WARNING!Refer to Safety chapters.Loading the laundryOpen the water tap. Connect the mainsplug to the mains socket.1. Pull the door handle to open the

Liquid or powder detergent1.AThe default position of the flap is A(powder detergent).2.To use liquid detergent:1. Remove the drawer. Push the drawered

• Put the detergent and the fabricconditioner into the compartments.• Carefully close the detergent drawer.Activating the appliancePress and hold for

Before starting the new programmethe appliance could drain the water. Inthis case, make sure that thedetergent is still in the detergentcompartment,

Touch the button if you want to set anew cycle.17DAILY USE

The laundry load• Divide the laundry in: white, coloured,synthetics, delicates and wool.• Obey the washing instructions that areon the laundry care la

WARNING!Refer to Safety chapters.External cleaningClean the appliance with soap and warmwater only. Fully dry all the surfaces. CAUTION!Do not use al

Before the installation and use of the appliance, carefully readthe supplied instructions. The manufacturer is not responsiblefor any injuries or dama

4.Cleaning the inlet hose and thevalve filter1.1232.3.4.45°20°Frost precautionsIf the appliance is installed in an areawhere the temperature can be le

WARNING!Make sure that the temperature ismore than 0°C before you use theappliance again. The manufacturer isnot responsible for damages causedby low

WARNING!Refer to Safety chapters.IntroductionThe start of the appliance does not occur orit stops during operation.First try to find a solution to th

PROBLEM POSSIBLE SOLUTIONThe appliance does notdrain the water.• Make sure that the sink spigot is not clogged.• Make sure that the drain hose has no

PROBLEM POSSIBLE SOLUTIONYou cannot set an op-tion.• Make sure that you press only the wanted touch button(s).After the check, activate the appliance.

Dimension Width/ Height/ Depth/Total depth600 mm/ 850 mm/ 520 mm/ 576mmElectrical connection VoltageOverall powerFuseFrequency220 - 240 V2200 W13 A50

Recycle the materials with the symbol .Put the packaging in applicable containersto recycle it. Help protect the environmentand human health and to r

27

192947340-A-432016

• If the mains power supply cable is damaged, it must bereplaced by the manufacturer, its Authorised Service Centreor similarly qualified persons to a

Installation• Remove all the packaging and the transitbolts.• Keep the transit bolts in a safe place. Ifthe appliance is to be moved in futurethey mus

• Disconnect the appliance from the mainselectrical and water supplies.• Cut off the mains electrical cable closeto the appliance and dispose of it.•

Appliance overview1 2 35641Worktop2Detergent dispenser3Control panel4Door handle5Rating plate6Feet for levelling the appliance6PRODUCT DESCRIPTION

87621 3 4 51on/off button 2programme selection touchpad3temperature selection touchpad 4spin selection touchpad 5options selection touchpad 6start/pau

PROGRAMMETEMPERATURERANGEMAXIMUMLOADMAXIMUMSPIN SPEEDPROGRAMME DESCRIPTION(TYPE OF LOAD AND SOIL LEVEL)30'@30°30°C3 kg800 rpmA short cycle for sy

Programme options compatibilityPROGRAMMEQUICK1)INTENSIVEEASY IRONRINSE ONLYDRAIN & SPINDELAY STARTEXTRA RINSE30'@30° cotto