Frigidaire FGWC5233TS Use and Care Manual Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 15
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
8
NOTE
When the highest/lowest temperature is reached, display will beep. Touch again to increase/
decrease the temperature to desired setting.
TEMPERATURE CONTROLS
Temperature Setting
The temperature setting range is as below.
Directly touch the + or – button to set the wine cooler temperature.
The rst touch on the + or – button will recall the previous set temperature displayed.
Touch the + button to increase the set temperature by 1°F (or by 1°C). On the contrary,
touch the – button to decrease the set temperature by 1°F (or by 1°C).
The digital display will change to show the set temperature of the inside cabinet after 10
seconds without being touched.
Selecting Fahrenheit (°F) & Celsius (°C) Display
Quickly press and release the F/C button to switch the Fahrenheit and Celsius temperature. The
display window will show the Fahrenheit and Celsius temperature setting of the current mode.
41°F 42°F 43°F 44°F 45°F 62°F 63°F 64°F......
5°C 6°C 7°C 8°C 9°C 16°C...... 17°C 18°C
Interior Lighting ON/OFF control
Touch the light button to turn ON/OFF the interior LED lighting.
The light will stay on until it is manually turned off or the door is closed.
Temperature Display Window
The temperature is displayed digitally. The digital display shows the set temperature.
If the temperature probe is out of order or some other error occurs, the display window may
show a code such as “E1”, “L” or “H” instead of the actual temperature and a continuous
beeping sound will be heard. In case this happens, the appliance is designed to keep
periodical running of compressor and fans which helps to maintain an adequate temperature
inside cabinet to protect your stored wines, but it is recommended that you have your unit
serviced as soon as possible.
IMPORTANT
To avoid damaging the compressor, please do not turn on the appliance again within 5
minutes after turning it off.
Operation Panel
Power ON/OFF Control
When the appliance is plugged into a power
outlet, it powers on automatically.
Touch the power button and hold for ve
seconds to turn ON/OFF the appliance.
After initial startup the display will default to 54°F (12°C).
Lighting
Temp.
Up
Display
Window
Temp.
Down
Power ºF/ºC Interchange
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments to this Manuals

No comments