Frigidaire FFFC20M4TW Owner's Manual download pdf (Page 6)

6

FIRST STEPS

5. Caster installation for the 20/25

cu. ft. freezer: Remove casters and

screws from the caster kit. Part A casters

are installed on the right front and

rear compressor side and middle front

and rear of the unit. Part B casters are

installed on the left front and rear of

the unit (with brake lever facing outside

of unit). Line up the caster holes with

the corresponding screw holes in the

mounting locations. See Figure 2.

Part A

Part A

Part B

Part B

Left Side

Front

Rear

Right Side

Bottom View

of Freezer

Part A

Part A

Compressor side

Middle

Figure 2

6. After casters are installed, with the help

of an assistant, carefully lift and rotate

the freezer to its upright position. Move

the freezer to the desired location, and

engage brakes on the 2 left casters.

WARNING

Casters with brakes are to stop chest freezer

movement on level ground only. They are

not intended to prevent movement on an

uneven or sloping oor.

Cleaning

• Wash any removable parts of the freezer

interior and exterior with mild detergent and

warm water. Wipe dry. DO NOT USE HARSH

CLEANERS ON THESE SURFACES.

• Do not use razor blades or other sharp

instruments which can scratch the freezer

surface when removing adhesive labels. Any

glue left from the tape can be removed with

a mixture of warm water and mild detergent

or the residue can be touched with the

sticky side of tape already removed. DO

NOT REMOVE THE SERIAL PLATE.

3. Remove the adjustable leveling legs

already installed on the freezer by

unscrewing counterclockwise, as they

are not required when using casters.

4. Caster installation for the 13/15 cu.

ft. freezer: Remove casters and screws

from the caster kit. The Part A casters

are installed on the right front and rear

compressor side of the unit. The Part B

casters are installed on the left front and

rear of the unit (with brake lever facing

outside). Align the caster holes with

the corresponding screw holes in the

mounting locations. See gure 1.

Figure 1

Part A

Part A

Part B

Part B

Left Side

Right Side

Bottom View

of Freezer

Front

Rear

Compressor Side

7. Wait a minimum of 2 hours before

connecting the freezer to an AC power

source. Avoid using a Ground Fault

Circuit Interrupter (GFCI) outlet. Do not

use an extension cord.

8. Install contents to the freezer storage

compartment when operating

temperature is reached.

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments