Frigidaire FFFC20M4TW Owner's Manual download pdf (Page 7)

7

ENERGY-SAVING TIPS

• The freezer should

be located in the

coolest area of the

room, away from heat

producing appliances

or heating ducts, and

out of direct sunlight.

• Let hot foods cool to

room temperature before placing in the

unit. Overloading the freezer forces the

compressor to run longer. Foods that freeze

too slowly may lose quality or spoil.

• Be sure to wrap foods properly and wipe

containers dry before placing them in the

unit. This cuts down on frost build-up

inside the freezer.

• Organize and label food to reduce lid

openings and extended searches. Remove

as many items as needed at one time, and

close lid as soon as possible.

SETTING THE

TEMPERATURE CONTROL

Cool Down Period

• For safe food storage, allow 4 hours for the

freezer to cool down completely. The unit

will run continuously for the rst several

hours. Foods that are already frozen may

be placed in the unit after the rst few

hours of operation. Unfrozen foods should

NOT be loaded into the freezer until the

unit has operated for 4 hours.

• When loading the unit, freeze only 3

pounds of fresh food per cubic foot of

freezer space at one time. Distribute

packages to be frozen evenly throughout

the freezer. It is not necessary to turn

temperature control knob to a colder

setting while freezing food.

Temperature Control

The temperature control is located on the right

outside wall. The temperature is factory preset to

provide satisfactory food storage temperatures.

The temperature control is adjustable to provide

a range of temperatures for your personal

satisfaction. If a colder temperature is desired,

turn the temperature control knob toward

COLDEST and allow 24 hours for temperatures to

stabilize between adjustments.

SETTING THE

TEMPERATURE CONTROL

CARE AND CLEANING

CAUTION

Damp objects stick to cold metal surfaces.

Do not touch interior metal surfaces with

wet or damp hands.

Between Defrostings

To avoid frequent defrosting, occasionally use

a plastic scraper to remove frost. Scrape with

a pulling motion. Never use a metal instrument

to remove frost.

CAUTION

Freezer must be unplugged (to avoid

electrical hazard) from power source when

cleaning or defrosting unit.

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments