Frigidaire FFES3025PW User Manual download pdf (Page 7)

30" ELECTRIC SLIDE-IN RANGE INSTALLATION INSTRUCTIONS

Four Conductor Wire Connection to Range

Where local codes does NOT permit connection of the

frame grounding conductor to the neutral wire of the

copper power supply cord (see Figure 4):

1. Removethescrewwhichisxingtherearwire

cover, then remove the rear wire cover (access

cover) to expose range terminal connection block

(see Figure 2).

2. Remove the grounding strap from the terminal

block and from the appliance frame.

3. Using the nuts supplied with the literature package,

connect the ground wire (green) of the copper

power supply cord to the frame of the appliance with

the ground screw, using the hole in the frame where

the ground strap was removed (see Figure 4).

4. Connect the neutral of the copper power supply

cord to the center silver-colored terminal of the

terminal block, and connect the other wires to the

outer terminals. Match wires and terminals by color

(red wires connected to the right terminal, black

wires connected to the left terminal).

5. Put back the rear wire cover using the screw

removed on step 1.

Terminal Block

Silver Colored Terminal

Red

Wire

Neutral

(White Wire)

Ground (Bare

Copper Wire)

To 240 V

Receptacle

A User Supplied

Strain-relief Must

Be Installed at

This Location

Black Wire

1 1/8" (2,9

cm) Dia.

Direct

Connection

Hole. Punch

Out Knockout

for 1 3/8" (3,5

cm) Dia. Cord

Kit Hole.

NOTE: Be sure to remove

the supplied grounding strap.

Figure 4

Electrical Connection to the

Range (U.S.A.)

Three Conductor Wire Connection to

Range

If local codes permit connection of the frame grounding

conductor to the neutral wire of the copper power

supply cord (see Figure 3):

1. Removethescrewwhichisxingtherearwire

cover, then remove the rear wire cover (access

cover) to expose range terminal connection block

(see Figure 2).

2. Using the nuts supplied in the literature package,

connect the neutral of the copper power supply

cord to the center silver-colored terminal of the

terminal block, and connect the other wires to the

outer terminals. Match wires and terminals by color

(red wires connected to the right terminal, black

wiresconnectedtotheleftterminal)(seegure3).

3. Put back the rear wire cover using the screw

removed on step 1.

Figure 3

Silver Colored Terminal

1 1/8" (2,9 cm) Dia.

Direct Connection

Hole. Punch Out

Knockout for 1 3/8"

(3,5 cm) Dia. Cord

Kit Hole.

To 240 V

Receptacle

A User Supplied

Strain-relief Must

Be Installed at This

Location.

Black

Wire

Terminal

Block

Cord

Mounting

Plate

Neutral

(White Wire)

Grounding

Strap

Red Wire

1 2 3 4 5 6 7 8 9 10 11 12 ... 39 40

Comments to this Manuals

No comments

Frigidaire FFES3025PW User Manual Page 7

Comments to this Manuals

Related products and manuals for Kitchen Frigidaire FFES3025PW