Frigidaire FFHN2740PE Owner's Manual download pdf (Page 16)

CONTROLS

Options may vary

A red indicator light will be illuminated above most active features.

Touch the icon to activate the options below.

quickice Increasestheproductionofice

waterlter Pressandholdforthreesecondstoresetafterlter

change.

C/F Touch to toggle display from Fahrenheit to Celsius.

default settings Resets all refrigerator settings such as temp, temp

display and tones to their factory default settings.

Power on-off Press and hold for three seconds to turn off the cooling

system to clean the refrigerator. It also turns off the ice

maker. The temperature displays will read OFF.

Energy Saver Keep this switch set on energy saver (light on) for low-

est energy usage. If moisture appears on the cabinet

between the doors, pressing this button will turn the light

off and enable an electric heater used to reduce moisture

on the cabinet between the doors.

Setting cooling temperatures

Press the “∧” or “∨” indicator to adjust the temperature to the

desired setting.

Thetemperaturedisplaywillbegintoblinkwiththersttouch.The

display will time out after 10 seconds and return to the basic display.

Alarms

Door Ajar If the door has been left open for an extended period

of time, an alarm will sound and the door ajar indicator

will display on the bottom display of the control panel.

The alarm is turned off by closing the door. The mute

sounds key will blink to prompt the reset of any active

alarms. Press this key to reset any system alarms.

High Temp In the event of a high temperature condition, the

temperature display will blink and display “HI”. After

20 minutes, the alarm will sound and the high temp

indicator will be red on the bottom of the control panel.

The mute sounds icon will illuminate until pressed,

acknowledging the alarm, at which time the highest

temperature reached will be displayed and the refrigera-

tor will resume normal operation. In case the high temp

alarmisnotacknowledgedattherstalarmsoundtime

out,whenthedoorisrstopened,thealarmsoundwill

be repeated.

Power Fail In the event of a power failure, the power fail alert

will be displayed and the temperature display will blink

until the mute sounds icon is pressed, acknowledging

the alarm. Other modes may be turned off until the

alarm is acknowledged. The power fail alert is turned

off and the refrigerator will resume normal operation.

The high temp alarm may also be illuminated until a

safe operating range temperature has been reached.

IMPORTANT

Pressing the system on-off icon does not turn off power to your

refrigerator. You must unplug the power cord from the wall outlet.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Comments to this Manuals

No comments

Frigidaire FFHN2740PE Owner's Manual Page 16

Comments to this Manuals

Related products and manuals for Side-by-side fridge-freezers Frigidaire FFHN2740PE